Details
1x 2.5ml eGo DCT - Dual Coil Cartomizer Tank with polypropylene tube
1x eGo DCT Cartomizer
1x drip tip
1x silicone washer (to insert in the carto after initial filling, to be placed into the cartomizer flat side up to prevent the wadding material drying out at the top).
How to Fill Your Tank:
Remove your drip tip from the top of the cartomizer and pull the cartomiser out of the empty tank and fill the cartomiser thoroughly with e-liquid (about 60-70 drops).
Push the fill carto back into the tank from the bottom (the bottom has a recess for the flange) and leave it 3/4ths of the way in.
Angle your tank and fill it with liquid so that the liquid is filling the outside of the cartomizer. We recommend only filling 3/4ths of the way full.
When refilling the tank DO NOT pull from the tube itself, doing so could cause the tube to be removed from the bottom. Pull from the metal bottom and pull up.
These cartomisers are designed for using PG liquid; if you want use VG liquid you need to dilute the VG down by 10-20% vodka or deionised water (available from your local car spares store).
