Details
Manufactured by Kanger; resistance 2 ohms.
Due to being low resistance, these cartomisers are only suitable for batteries 450mAh or greater. Due to the disposable element of the cartridges, they come without warranty.
Make sure the carto is completely filled, with the liquid evenly distributed in the filler material, before first use.
The wadding must be thoroughly soaked with e-liquid before use; it is best to leave the carto a while for the liquid to soak in properly before using.
Probably the easiest way of completely filling your carto before first use is to use the carto condom filling technique.
(see video below)
Then, a great way of using cartos is removing the cap with a paper clip, and insert a drip tip.
You can then top up with e-liquid as required.
For topping up, just pull out drip tip and add a few drops around the sides of the chamber,
for better distribution of the liquid in the carto.
And not only does this mean you can very easily keep your carto filled up, but the tip is much nicer on the lips, and also protects them in case your carto gets hot.
As with all atomisers and cartos, they like to be kept as wet as possible (but not flooded) for best results and performance.
Filling Instructions:
The easiest way to fill up empty cartos initially is using the rubber cap/sleeve that comes with them (as shown in this video below).
