Mini Lavatube Kit

The LavaTube device comes with 28 days warranty.

• Power button (Red): Hold this down for 5 seconds to turn the device on/off.
• Fire button (Black): Once powered on the fire button will activate your atomiser at the set voltage.
• Voltage adjustment buttons are above the red power button: use the + and - buttons to adjust the voltage in 0.1v steps.
Once 6.0v is reached the voltage will step back to 3.0v if you push the + button again.
The LCD screen will display the selected voltage; easy to read and backlit with a red LED.
It simply displays the voltage as you set/change it using the voltage set buttons.
Holding down both + and - buttons for several seconds will lock the voltage so it can not accidently be changed.
• Press power button 7 times quickly to provide battery voltage; it is recommended to recharge when battery drops to 3.7v.
• To determine load voltage, press power button 7 times, then press the fire button and power button simultaneously.

The Lavatube VV Mod comes with built in circuit/switch protection. This means that you cannot push the switch over 2.5amps of load. The great thing about this is that rather than simply not working/displaying an error the Lavatube will automatically put the voltage down to an acceptable level and carry on working!

The Lavatube also has regulated voltage output which keeps the voltage exactly the same each time you use it. As your 18650 battery continues to drain the Lavatube regulated voltage will always output at the same level!

Activation protection cuts in at 10 seconds. This means if you try and use the Lavatube for longer than 10 seconds it will simply cut off in order to protect you and your atomisers!

Reverse battery protection - not sure about your negative from your positive end? Don't worry if you put the battery in the wrong way, the device simply won't work. In addition if your battery becomes discharged the Lavatube will protect itself and your battery by shutting off.